ENJOY FREE SHIPPING TO THE CONTIGUOUS USA ON ALL WEBSITE ORDERS $50+
View Cart

Digital Programmable Timer & Temperature Flow Control

Active Ice cold water cyrotherapy Pad  digital timer is shown with its contents
Digital Programmable Timer & Temperature Flow Control
Active Ice cold water cyrotherapy Pad  digital timer is shown with its contents
Digital Programmable Timer & Temperature Flow Control
Time is 50 and a half inches reservoir side is thirty one and a half and power supply side is fifteen and a half
Digital Programmable Timer & Temperature Flow Control
Steps to plugin in reservoir properly first power supply then timer then into reservoir
Digital Programmable Timer & Temperature Flow Control
(Click to see larger image and other views)
Price: $35.00
SKU: DFT
The combination programmable timer and flow control is a direct replacement for the standard programmable digital timer. In addition to custom cold therapy on and off cycles, this allows you to modify the flow of the water, modifying the temperature and giving you even more customization for your therapy.

Note: Do not turn on your system without adding water first.

Active Ice® 3.0 Programmable Timer & Temperature Flow Control Video and Instructions


Using Your Programmable Timer:

Below are the instructions for our NEW patent-pending combination programmable timer and temperature flow control. This combination control is plugged-in between the power supply and the cooling reservoir. It has four (4) temperature flow settings: 4 (coldest), 3, 2 and 1 (least cold). The timer function may be set in 10-minute increments up to 990 minutes. Please follow the steps below to operate the system.

1. The center button is both the on/off switch and the temperature flow control.
2. When the therapy system is set-up and ready to turn on, push the center button to turn the system on.
3. The system will immediately turn on and the LED display will show the number "4,” then "ON,” then "10.”
4. The system’s default setting at start-up is set at the coldest temperature setting of "4” and the timer is set to cycle 10 minutes on and 10 minutes off.
5. Increase or decrease the ON time by pressing the right (+) or left (-) button.
6. Increase or decrease the OFF time by pressing the top (+) or bottom (-) button.
7. The timer will cycle the system on and off per the set times until they are changed or the system is turned off.
8. If it is desired to have the system on for a certain number of minutes then turn off with no cycling, then set the time off to "0”.
9. To regulate the water flow, press the center button once to show the default flow setting of "4.” Press the center button again and the flow control will drop to setting "3”. Press it again and it will drop to "2”, then again to have it drop to "1” and one final time will turn the system off.
10. The system will maintain the water flow settings throughout the on and off cycles but will return to the default setting of "4” if turned off.
11. As long as the timer is plugged in, the last "on” and "off” setting will automatically come up each time it is turned on. However, the temperature flow control will revert back to the coldest setting "4.”
12. If the timer is unplugged, the sequence starts over at number 2 above.

Please be advised, it is normal to have minimal flow at the lowest setting ("1”).

CAUTION: Always follow your doctor’s instructions in regards to treatment time, "on” and "off” cycles, and skin inspection.
This programmable timer and temperature flow control is ONLY compatible with the Polar Products Active Ice® 3.0 Cold Therapy System.
Product Details

This combination control is plugged-in between the power supply and the cooling reservoir. It has four (4) temperature flow settings: 4 (coldest), 3, 2 and 1 (least cold). The timer function may be set in 10-minute increments up to 990 minutes.

The Patent Pending Digital Programmable Timer has:

  • Two buttons to custom set your "off" cooling time
  • Two buttons to custom set your "on" cooling time
  • One on/off button


Timer Cord is 32" From Panel (50.5" Total).

Product Reviews
Rated: Empty Star Empty Star Empty Star Empty Star Empty Star
Rate this product:  1   2   3   4   5 

"Updated controller"

on 7/6/2022 10:39:04 AM

Empty Star Empty Star Empty Star Empty Star Empty Star

Details: This controller is wonderful, also love that I got the longer cord. Being my hurt shoulder was my dominant it is nice to have the extra length to reach the control, also love being able to adjust the temperature.

Location: VA

Would you recommend this to a friend?: 100%

"Mac"

on 3/25/2022 11:45:25 AM

Empty Star Empty Star Empty Star Empty Star Full Star

Details: Works well as a temperature control and times the on and off periods in increments of 10 minutes. Like 0, 10, 20, 30 and so on for either on or off times. Adding the timer extension cord does make it more convenient. It is a good buy.

Location: Michigan

Would you recommend this to a friend?: Yes

"Much needed by me for night time"

on 3/7/2022 10:07:23 AM

Empty Star Empty Star Empty Star Empty Star Empty Star

Details: I adore this flow control timer. I set it on 2 for night time and 20 minutes on, and 10 minutes off. Then in a heavy flannel shirt, I left it going all night to control pain and swelling. Not saying this will work for everyone but it worked great for me. I wouldn't be able to leave the cooling on all night unless I was able to turn it down. I am just over a week post-op and doing very well. I removed the timer that came with my system and just use this one. Standalone.

Location: NC

Would you recommend this to a friend?: Yes

Let Us Help You

Monday-Friday 8:30 a.m. - 4:30 p.m. EST
Customer Service 800.763.8423 • 330.253.9973
polar@polarproducts.com Fax: 330.253.4233
3380 Cavalier Trail, Stow, Ohio 44224
©Copyright 2022 Polar Products Inc. All Rights Reserved.
I Can Help! What Questions Do You Have?X